Plumbing Tips, Tricks, And Techniques To Keep Your Pipes Clean

Some tips on how to start with plumbing makes a great start for beginners. Below are some tips that will hopefully assist you into making better decisions and to start maintaining your own home system. You need it to work effectively, so it is to your benefit to learn something from these tips.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

You should have your septic tank pumped once every five years for best performance. Doing so will help to avoid septic tank problems by ensuring that the tank does not become clogged with sediment. Although having a septic tank pumped costs money, cleaning up sewage backup in your home will ultimately cost much more.

If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

If your drain in any device is taking longer to drain water, then you may need to have your pipes professionally cleaned depending on the severity of the circumstances. Before you do this, there are several different products you can try. However, some of them are professional strength and all products should be used with caution.

Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank’s ball or flapper.

These tips should have given you some much needed insight on where to start and how to begin with your own plumbing jobs at home. These tips were thoughtfully compiled to help the plumbing beginner learn the basics and some other cool techniques that are simple enough to use for everyday maintenance and repair.